Full Support for Bambu Lab H2S and H2D Printers
Print Hive now fully supports the H2S and H2D — dual cameras, smart dual-nozzle AMS mapping, and complete remote control, out of the box.
If you're running H2S or H2D printers in your farm, you know they're built different. Dual nozzles, multi-camera setups, support material workflows — these machines can handle complex jobs that single-nozzle printers can't touch.
Print Hive now fully supports both models. Everything you'd expect from our platform works seamlessly with your H2S and H2D printers.
What This Means for Your Operation
Dual-Camera Live Streaming
Both cameras. Full HD. Real-time.
Monitor both nozzles simultaneously without walking to the printer. Catch issues early, verify layer adhesion on support structures, and keep jobs running smoothly from your desk or phone.
Resolutions supported: 1080p, 720p, 480p
Smart Dual-Nozzle Filament Management
Print Hive automatically handles the complexity of dual-nozzle AMS mapping.
When you load a dual-nozzle job, our system:
- Identifies which filaments go to which nozzle
- Matches colors intelligently across your AMS units
- Maps support materials to the correct nozzle
- Validates everything before the job starts
No more manual slot assignments. No more support material mix-ups.
Complete Printer Control
Everything you can do with your X1C or P1S works with H2S and H2D:
- Automatic printer discovery
- Real-time status monitoring
- Remote job management
- Live camera feeds from both cameras
- Material tracking and management
- Print history and analytics
- Smart alerts when issues arise
Support Material Workflows Made Simple
Running PLA with PVA support? PETG with break-away?
Print Hive tracks both materials independently, alerts you when either is running low, and ensures your support material is loaded in the correct nozzle before jobs start.
No more mid-print discoveries that your support filament is empty.
Technical Highlights
For operators who want the details:
| Detail | Spec |
|---|---|
| Model Detection | Automatic identification of H2S (O1S) and H2D (O1D) |
| Multi-Camera Support | Simultaneous streaming from both cameras |
| RTSP Port | 322 (standard Bambu Lab configuration) |
| AMS Mapping | CIE Lab color matching with dual-nozzle awareness |
| Discovery Protocol | SSDP auto-discovery on local network |
| Filament Profiles | Full support for all Bambu Lab and third-party profiles |
Already Running H2S or H2D?
Your printers will auto-discover when you connect Print Hive to your network. The setup is identical to any other Bambu Lab printer — enter your access code, and you're monitoring in minutes.
If you're already using Print Hive with other Bambu Lab models, your H2S/H2D printers will show up automatically. No configuration needed.
Common Questions
Does this work with existing AMS units? Yes. All AMS configurations (single or multiple units) work with dual-nozzle mapping.
Can I monitor both cameras simultaneously? Yes. Both camera feeds are available in real-time.
What about custom filament profiles? Fully supported. Print Hive works with any profile you use in Bambu Studio.
Is there a limit on dual-nozzle jobs? No limits. Run as many dual-nozzle jobs as your farm can handle.
Ready to bring your H2S or H2D printers into Print Hive? Get started with Print Hive — setup takes minutes.