HiveLoop: Getting Started

HiveLoop automates repeated prints with automatic ejection and re-start.

Prerequisites

• Upload a sliced .gcode.3mf plate generated by Bambu Studio.
• Ensure printers are connected via Hive Link and online.

Create a Loop Job

1. Open your model in the Model Library and click "Create Hive Loop".
2. Choose number of loops and optional cooldown between cycles.
3. Select a sweep profile (Top Tap recommended) and generate.

How it Works

• Print runs once with normal start sequence (calibration optional on later loops).
• After completion, the nozzle executes a column-wise sweep to eject parts.
• The same plate G-code restarts for the next loop.