PRINT HIVE
Start 14-day farm trial

Bambu Lab H2D · Fully supported

Your H2D farm,
on autopilot.

Connect every H2D you own. PrintHive watches them, queues the next job, and assigns the right filament before you walk over.

Connect your H2DWatch the demo
ID
O1D
Build
350 × 320 × 325 mm
Toolhead
2 nozzles
Filament
AMS · AMS 2 Pro · AMS HT
Video
RTSP · :322
Chamber
Heated chamber
Link
Hive Link · LAN MQTT
Cameras
2
Bed width
350mm
Build height
325mm

Does PrintHive work with the Bambu Lab H2D?

Yes. PrintHive connects to the H2D through Hive Link · LAN MQTT. Check the support rows below before you connect your printer.

Does PrintHive work with the H2D?
Yes
How does it connect?
Hive Link · LAN MQTT
Does it need the Bambu cloud?
No · LAN-only
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Yes · 2 nozzles · AMS + 2 EXT
Live video?
Yes · RTSP · :322
Auto Bed Clear?
Not yet
Hex + MCP?
Yes · Status and filament
O1D

Connect your H2D in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "H2D", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.

Filament assignment

Assign job filaments to AMS slots or the left and right external spools. Check the nozzle and filament assignments before you start the job.

Filament assignment demo

desk-organizer_3color.3mf
AMS A · L
  • A1PLA Basic Jade White
  • A2PLA Basic Black
  • A3PLA Matte Mandarin Orange
  • A4PLA Basic Cyan
HT · R
  • HT1PETG HF Blue
EXT-L
  • EXT-LEmpty
EXT-R
  • EXT-REmpty

Demo job and loaded slots. No printer connection. Solid = exact match. Dashed = substitution. Select a job filament to reroute it. An occupied slot becomes a Shared Slot.

Jade White: none, no slot assigned. Mandarin Orange: none, no slot assigned. Blue: none, no slot assigned.

Limits

  • Auto Bed Clear · Not yet. This model is not in the Stage 1 Production Support Set.

FAQ

How do I set up the connection for the H2D?
Install Hive Link on a computer on the same network as the printer. Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "H2D", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.
How does filament assignment work on the H2D?
Assign job filaments to AMS slots or the left and right external spools. Check the nozzle and filament assignments before you start the job.
How does PrintHive get video from the H2D?
Hive Link gets video through RTSP · :322 on your local network. 2 cameras are listed for this model.