PRINT HIVE
Start 14-day farm trial

Prusa MINI · Beta

Your MINI farm,
on autopilot.

Prusa support is in progress. Check the support rows below before you connect your printer.

Connect your MINIWatch the demo
ID
MINI
Toolhead
1 nozzle
Filament
External spool
Link
Hive Link · PrusaLink
Materials per job
1
Cameras
0

Does PrintHive work with the Prusa MINI?

Yes, beta. Prusa support is in progress. Check the support rows below before you connect your printer.

Does PrintHive work with the MINI?
Yes, beta
How does it connect?
Hive Link · PrusaLink
Does it need the Prusa cloud?
No
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Not yet
Live video?
Not yet
Auto Bed Clear?
Not yet
Hex + MCP?
Beta · Status only
MINI

Connect your MINI in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Enable local PrusaLink and copy the printer's IP address and PrusaLink password / API key.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Prusa" and Printer Model "MINI", and select the Host that runs Hive Link. Enter IP Address and PrusaLink password / API key. Prusa support is in progress. Check the beta limits before use.

Filament assignment

Prusa is in progress. This connection does not support job-to-slot selection.

Limits

  • Filament assignment · Not yet. Prusa is in progress. This connection does not support job-to-slot selection.
  • Live video · Not yet. Live video is not supported by this printer connection.
  • Auto Bed Clear · Not yet. This model is not in the Stage 1 Production Support Set.
  • Hex + MCP · Beta. Use Hex and MCP to read printer status. This connection does not report loaded filament to Hex or MCP.

FAQ

How do I set up the connection for the MINI?
Install Hive Link on a computer on the same network as the printer. Enable local PrusaLink and copy the printer's IP address and PrusaLink password / API key. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Prusa" and Printer Model "MINI", and select the Host that runs Hive Link. Enter IP Address and PrusaLink password / API key. Prusa support is in progress. Check the beta limits before use.
How does filament assignment work on the MINI?
Prusa is in progress. This connection does not support job-to-slot selection.
How does PrintHive get video from the MINI?
PrintHive does not have a supported video connection for this model yet.