PRINT HIVE
Start 14-day farm trial

Bambu Lab P2S · Fully supported

Your P2S farm,
on autopilot.

Connect every P2S you own. PrintHive watches them, queues the next job, and assigns the right filament before you walk over.

Connect your P2SWatch the demo
ID
N7
Build
256 × 256 × 256 mm
Toolhead
1 nozzle
Filament
AMS · AMS 2 Pro · AMS HT
Chamber
Enclosed
Link
Hive Link · LAN MQTT
Cameras
1
Bed width
256mm
Build height
256mm

Does PrintHive work with the Bambu Lab P2S?

Yes. PrintHive connects to the P2S through Hive Link · LAN MQTT. Check the support rows below before you connect your printer.

Does PrintHive work with the P2S?
Yes
How does it connect?
Hive Link · LAN MQTT
Does it need the Bambu cloud?
No · LAN-only
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Yes · AMS + EXT
Live video?
Not yet
Auto Bed Clear?
Beta
Hex + MCP?
Yes · Status and filament
N7

Connect your P2S in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "P2S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.

Filament assignment

PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.

Filament assignment demo

desk-organizer_3color.3mf
AMS A
  • A1PLA Basic Jade White
  • A2PLA Basic Black
  • A3PLA Matte Mandarin Orange
  • A4PETG HF Blue
EXT
  • EXTEmpty

Demo job and loaded slots. No printer connection. Solid = exact match. Dashed = substitution. Select a job filament to reroute it. An occupied slot becomes a Shared Slot.

Jade White: none, no slot assigned. Mandarin Orange: none, no slot assigned. Blue: none, no slot assigned.

Limits

  • Live video · Not yet. Live video is not supported by this printer connection.
  • Auto Bed Clear · Beta. This model is in the Stage 1 Production Support Set. Each farm needs validation evidence.

FAQ

How do I set up the connection for the P2S?
Install Hive Link on a computer on the same network as the printer. Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "P2S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.
How does filament assignment work on the P2S?
PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.
How does PrintHive get video from the P2S?
PrintHive does not have a supported video connection for this model yet.