PRINT HIVE
Start 14-day farm trial

Bambu Lab X1 · Fully supported

Your X1 farm,
on autopilot.

Connect every X1 you own. PrintHive watches them, queues the next job, and assigns the right filament before you walk over.

Connect your X1Watch the demo
ID
BL-P002
Build
256 × 256 × 250 mm
Toolhead
1 nozzle
Filament
AMS · AMS 2 Pro · AMS HT
Video
RTSP · :322
Chamber
Enclosed
Link
Hive Link · LAN MQTT
Materials per job
16
Cameras
1
Bed width
256mm
Build height
250mm

Does PrintHive work with the Bambu Lab X1?

Yes. PrintHive connects to the X1 through Hive Link · LAN MQTT. Check the support rows below before you connect your printer.

Does PrintHive work with the X1?
Yes
How does it connect?
Hive Link · LAN MQTT
Does it need the Bambu cloud?
No · LAN-only
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Yes · 16 + EXT
Live video?
Yes · RTSP · :322
Auto Bed Clear?
Not yet
Hex + MCP?
Yes · Status and filament
BL-P002

Connect your X1 in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "X1", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.

Filament assignment

PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.

Filament assignment demo

desk-organizer_3color.3mf
AMS A
  • A1PLA Basic Jade White
  • A2PLA Basic Black
  • A3PLA Matte Mandarin Orange
  • A4PETG HF Blue
EXT
  • EXTEmpty

Demo job and loaded slots. No printer connection. Solid = exact match. Dashed = substitution. Select a job filament to reroute it. An occupied slot becomes a Shared Slot.

Jade White: none, no slot assigned. Mandarin Orange: none, no slot assigned. Blue: none, no slot assigned.

Limits

  • Auto Bed Clear · Not yet. This model is not in the Stage 1 Production Support Set.

FAQ

How do I set up the connection for the X1?
Install Hive Link on a computer on the same network as the printer. Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "X1", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.
How does filament assignment work on the X1?
PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.
How does PrintHive get video from the X1?
Hive Link gets video through RTSP · :322 on your local network. 1 camera is listed for this model.