PRINT HIVE
Start 14-day farm trial

Bambu Lab H2S · Fully supported

Your H2S farm,
on autopilot.

Connect every H2S you own. PrintHive watches them, queues the next job, and assigns the right filament before you walk over.

Connect your H2SWatch the demo
ID
O1S
Build
340 × 320 × 340 mm
Toolhead
1 nozzle
Filament
AMS · AMS 2 Pro · AMS HT
Video
RTSP · :322
Chamber
Heated chamber
Link
Hive Link · LAN MQTT
Cameras
2
Bed width
340mm
Build height
340mm

Does PrintHive work with the Bambu Lab H2S?

Yes. PrintHive connects to the H2S through Hive Link · LAN MQTT. Check the support rows below before you connect your printer.

Does PrintHive work with the H2S?
Yes
How does it connect?
Hive Link · LAN MQTT
Does it need the Bambu cloud?
No · LAN-only
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Yes · AMS + EXT
Live video?
Yes · RTSP · :322
Auto Bed Clear?
Not yet
Hex + MCP?
Yes · Status and filament
O1S

Connect your H2S in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "H2S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.

Filament assignment

PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.

Filament assignment demo

desk-organizer_3color.3mf
AMS A
  • A1PLA Basic Jade White
  • A2PLA Basic Black
  • A3PLA Matte Mandarin Orange
  • A4PETG HF Blue
EXT
  • EXTEmpty

Demo job and loaded slots. No printer connection. Solid = exact match. Dashed = substitution. Select a job filament to reroute it. An occupied slot becomes a Shared Slot.

Jade White: none, no slot assigned. Mandarin Orange: none, no slot assigned. Blue: none, no slot assigned.

Limits

  • Auto Bed Clear · Not yet. This model is not in the Stage 1 Production Support Set.

FAQ

How do I set up the connection for the H2S?
Install Hive Link on a computer on the same network as the printer. Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "H2S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.
How does filament assignment work on the H2S?
PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.
How does PrintHive get video from the H2S?
Hive Link gets video through RTSP · :322 on your local network. 2 cameras are listed for this model.