PRINT HIVE
Start 14-day farm trial

Bambu Lab P1S · Fully supported

Your P1S farm,
on autopilot.

Connect every P1S you own. PrintHive watches them, queues the next job, and assigns the right filament before you walk over.

Connect your P1SWatch the demo
ID
C12
Build
256 × 256 × 250 mm
Toolhead
1 nozzle
Filament
AMS · AMS 2 Pro · AMS HT
Video
Native · :6000
Chamber
Enclosed
Link
Hive Link · LAN MQTT
Materials per job
16
Cameras
1
Bed width
256mm
Build height
250mm

Does PrintHive work with the Bambu Lab P1S?

Yes. PrintHive connects to the P1S through Hive Link · LAN MQTT. Check the support rows below before you connect your printer.

Does PrintHive work with the P1S?
Yes
How does it connect?
Hive Link · LAN MQTT
Does it need the Bambu cloud?
No · LAN-only
Live status?
Yes
Remote start + Smart Queue?
Yes
Filament assignment?
Yes · 16 + EXT
Live video?
Yes · Native · :6000
Auto Bed Clear?
Beta
Hex + MCP?
Yes · Status and filament
C12

Connect your P1S in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "P1S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.

Filament assignment

PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.

Filament assignment demo

desk-organizer_3color.3mf
AMS A
  • A1PLA Basic Jade White
  • A2PLA Basic Black
  • A3PLA Matte Mandarin Orange
  • A4PETG HF Blue
EXT
  • EXTEmpty

Demo job and loaded slots. No printer connection. Solid = exact match. Dashed = substitution. Select a job filament to reroute it. An occupied slot becomes a Shared Slot.

Jade White: none, no slot assigned. Mandarin Orange: none, no slot assigned. Blue: none, no slot assigned.

Limits

  • Auto Bed Clear · Beta. This model is in the Stage 1 Production Support Set. Each farm needs validation evidence.

FAQ

How do I set up the connection for the P1S?
Install Hive Link on a computer on the same network as the printer. Turn on LAN-only mode on the printer. Copy its Access code, Serial number, and IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Bambu Lab" and Printer Model "P1S", and select the Host that runs Hive Link. Enter IP Address, Access code, and Serial number.
How does filament assignment work on the P1S?
PrintHive checks material and color when it maps job filaments to AMS slots. You can change the slot selection. Check the loaded filament and the assignment before you start the job.
How does PrintHive get video from the P1S?
Hive Link gets video through Native · :6000 on your local network. 1 camera is listed for this model.