PRINT HIVE
Start 14-day farm trial

Elegoo Centauri Carbon · Fully supported

Your Centauri Carbon farm,
on autopilot.

PrintHive connects to the Centauri Carbon through Hive Link · Elegoo SDCP. Check the support rows below before you connect your printer.

Connect your Centauri CarbonWatch the demo
ID
Centauri Carbon
Toolhead
1 nozzle
Filament
External spool
Video
MJPEG · :3031/video
Link
Hive Link · Elegoo SDCP
Materials per job
1
Cameras
1

Does PrintHive work with the Elegoo Centauri Carbon?

Yes. PrintHive connects to the Centauri Carbon through Hive Link · Elegoo SDCP. Check the support rows below before you connect your printer.

Does PrintHive work with the Centauri Carbon?
Yes
How does it connect?
Hive Link · Elegoo SDCP
Does it need the Elegoo cloud?
No
Live status?
Yes
Remote start + Smart Queue?
Beta
Filament assignment?
Not yet
Live video?
Yes · MJPEG · :3031/video
Auto Bed Clear?
Not yet
Hex + MCP?
Yes · Status only
Centauri Carbon

Connect your Centauri Carbon in three steps

  1. 1Install Hive Link on a computer on the same network as the printer.
  2. 2Enable the printer's local SDCP connection and find its IP address.
  3. 3Add the printer in PrintHive. Enter Printer Name, select Printer Make "Elegoo" and Printer Model "Centauri Carbon", and select the Host that runs Hive Link. Enter IP Address. Leave API key blank for Centauri Carbon.

Filament assignment

Job-to-slot selection is not supported by this connection.

Limits

  • Remote start + Smart Queue · Beta. Start files already on the printer. File upload is not supported.
  • Filament assignment · Not yet. Job-to-slot selection is not supported by this connection.
  • Auto Bed Clear · Not yet. This model is not in the Stage 1 Production Support Set.
  • Hex + MCP · Supported. Use Hex and MCP to read printer status. This connection does not report loaded filament to Hex or MCP.

FAQ

How do I set up the connection for the Centauri Carbon?
Install Hive Link on a computer on the same network as the printer. Enable the printer's local SDCP connection and find its IP address. Add the printer in PrintHive. Enter Printer Name, select Printer Make "Elegoo" and Printer Model "Centauri Carbon", and select the Host that runs Hive Link. Enter IP Address. Leave API key blank for Centauri Carbon.
How does filament assignment work on the Centauri Carbon?
Job-to-slot selection is not supported by this connection.
How does PrintHive get video from the Centauri Carbon?
Hive Link gets video through MJPEG · :3031/video on your local network. 1 camera is listed for this model.